T O P I C R E V I E W |
Lysander |
Posted - 28 Jun 2004 : 16:31:18 I know this isn't strictly "on target," but I figured those here probably do know, and it's better than wading through some wizard's leavings to find . . . Now that 3.5 is out, is there a good (or even passable) conversion for characters - specifically 2E/S&P made characters - up to 3.5E? I have a number of 2E/S&P characters that aren't "cookie cutter" products of their classes, that I'd like to have a 3.5E version of their character sheet. I know there was an older 2E-to-3E conversion in the 3E PHB (if I remember right, as to the location of it) but it didn't seem to take into account the S&P alterations.
Feel free to contact me on the back burner, if that's easier.
Lysander |
7 L A T E S T R E P L I E S (Newest First) |
Arivia |
Posted - 30 Jun 2004 : 13:23:45 quote: Originally posted by Bookwyrm S&P?
Skills and Powers-sorta AD&D 2.5 but not required-and only printed as an addendum to the core rulebooks, not a replacement. Good stuff. |
Lysander |
Posted - 30 Jun 2004 : 13:22:06 quote: Originally posted by Bookwyrm
quote: Originally posted by Lysander
Certainly is better than some I'd heard before. Given I still think in S&P terms[...]
S&P?
Skills & Powers (online http://tinyurl.com/ysvro) ... sorry for the confusion
Actually, now that I think of it, (and if this isn't too heretical ) S&P might have influenced Prestige classes, in a "well, I want this ability, so what kind of disadvantage should be a counterweight?" kind of way.
quote: Originally posted by Bookwyrm
quote: Originally posted by Lysander I still like the THAC0 acronym better - sounds more imposing than "My BAB is better than yours!"
Well, since THAC0 was including extras like magic weapons, what you would be comparing it to would be the actual, not base, attack bonus.
So in other words: "Hey, how'd'ya like these AABs?"
Hmm, Abs are nice, but what about the rest of her? (Though, that does kind of prove that my reflex thinking is 2e )
Lysander |
Bookwyrm |
Posted - 30 Jun 2004 : 11:42:29 quote: Originally posted by RogueAssassin
This is a fairly good system. You could basically gauge hw strong the person is by what hes fought, but it also should be fair combat. If the balor had 1 arm and lost his sword then it wouldnt be quite as hard as a health balor.
I was sort of thinking along those lines.
quote: Originally posted by Lysander
Certainly is better than some I'd heard before. Given I still think in S&P terms[...]
S&P?
quote:
I still like the THAC0 acronym better - sounds more imposing than "My BAB is better than yours!"
Well, since THAC0 was including extras like magic weapons, what you would be comparing it to would be the actual, not base, attack bonus.
So in other words: "Hey, how'd'ya like these AABs?"
|
RogueAssassin |
Posted - 29 Jun 2004 : 19:24:05 quote: Originally posted by Bookwyrm
Unfortunately, I wouldn't know how. I do know that, as far as I can tell, 3e+ is so different from 2e that you can't ever do a straight transit. Part of that is because of the way a 2e character advanced. CRs are very different now, and reflect how challenges are less challenging later in life. I think that level-dependant XP makes more sense, though it requires more thought and math to work out. However, it's one reason (as far as I can tell) that a 2e character converted to a 3.xe character by XP total only becomes very imbalanced.
My only suggestion, having never done this myself, is to take your character and find a yardstick. If Faedrin Dragon-Slayer is able to stand up to a balor in single combat, look up the 3.x balor and use him as a yardstick. Figure out what it takes to stand up to a balor, make Faedrin that level, and work from there.
That might need some tweaking. I'm sure it does, since I've never done it, don't have any way to do so, and I only just thought of it off the top of my head. It's a start, though.
Anyone else have a suggestion? Perhaps someone could take a look at his character and give some more concrete advice than I was able to?
This is a fairly good system. You could basically gauge hw strong the person is by what hes fought, but it also should be fair combat. If the balor had 1 arm and lost his sword then it wouldnt be quite as hard as a health balor.
-The Rogue
|
Lysander |
Posted - 29 Jun 2004 : 19:13:11 quote: Originally posted by Wooly Rupert
quote: Originally posted by Bookwyrm
Unfortunately, I wouldn't know how. I do know that, as far as I can tell, 3e+ is so different from 2e that you can't ever do a straight transit. Part of that is because of the way a 2e character advanced. CRs are very different now, and reflect how challenges are less challenging later in life. I think that level-dependant XP makes more sense, though it requires more thought and math to work out. However, it's one reason (as far as I can tell) that a 2e character converted to a 3.xe character by XP total only becomes very imbalanced.
My only suggestion, having never done this myself, is to take your character and find a yardstick. If Faedrin Dragon-Slayer is able to stand up to a balor in single combat, look up the 3.x balor and use him as a yardstick. Figure out what it takes to stand up to a balor, make Faedrin that level, and work from there.
That might need some tweaking. I'm sure it does, since I've never done it, don't have any way to do so, and I only just thought of it off the top of my head. It's a start, though.
Anyone else have a suggestion? Perhaps someone could take a look at his character and give some more concrete advice than I was able to?
Actually, I find your suggestion to be quite a good one.
Certainly is better than some I'd heard before. Given I still think in S&P terms, I find that even for a 1st level character I can run through the generation process faster than stumbling through 3.xE. And, with the trait trade-offs, it makes mapping what the character can and can't do difficult (e.g. armored, sword-weilding invokers, rangers that can't use two weapons or priest spells, priests that can cast invocation/evocation spells - all allowable under S&P, for a price ) It would certainly put a damper on converting the aforementioned Invoker to 3.xE rules, only to find his longsword and studded leather were stuck in 2e - or that he had to "burn a level" (multiclass to fighter) to use it. Figuring THAC0 to BAB (I still like the THAC0 acronym better - sounds more imposing than "My BAB is better than yours!" ) and old saving throws to new ones isn't as big of a hurdle, I would think.
Lysander |
Wooly Rupert |
Posted - 29 Jun 2004 : 08:22:56 quote: Originally posted by Bookwyrm
Unfortunately, I wouldn't know how. I do know that, as far as I can tell, 3e+ is so different from 2e that you can't ever do a straight transit. Part of that is because of the way a 2e character advanced. CRs are very different now, and reflect how challenges are less challenging later in life. I think that level-dependant XP makes more sense, though it requires more thought and math to work out. However, it's one reason (as far as I can tell) that a 2e character converted to a 3.xe character by XP total only becomes very imbalanced.
My only suggestion, having never done this myself, is to take your character and find a yardstick. If Faedrin Dragon-Slayer is able to stand up to a balor in single combat, look up the 3.x balor and use him as a yardstick. Figure out what it takes to stand up to a balor, make Faedrin that level, and work from there.
That might need some tweaking. I'm sure it does, since I've never done it, don't have any way to do so, and I only just thought of it off the top of my head. It's a start, though.
Anyone else have a suggestion? Perhaps someone could take a look at his character and give some more concrete advice than I was able to?
Actually, I find your suggestion to be quite a good one. |
Bookwyrm |
Posted - 29 Jun 2004 : 08:00:55 Unfortunately, I wouldn't know how. I do know that, as far as I can tell, 3e+ is so different from 2e that you can't ever do a straight transit. Part of that is because of the way a 2e character advanced. CRs are very different now, and reflect how challenges are less challenging later in life. I think that level-dependant XP makes more sense, though it requires more thought and math to work out. However, it's one reason (as far as I can tell) that a 2e character converted to a 3.xe character by XP total only becomes very imbalanced.
My only suggestion, having never done this myself, is to take your character and find a yardstick. If Faedrin Dragon-Slayer is able to stand up to a balor in single combat, look up the 3.x balor and use him as a yardstick. Figure out what it takes to stand up to a balor, make Faedrin that level, and work from there.
That might need some tweaking. I'm sure it does, since I've never done it, don't have any way to do so, and I only just thought of it off the top of my head. It's a start, though.
Anyone else have a suggestion? Perhaps someone could take a look at his character and give some more concrete advice than I was able to? |
|
|